9.  Muti-function lighting modes，tail RGB flashlight design,flashing in multiple colors.

10.   The whole lamp plastic part adopts outdoor PC material fire rating,anti-UV,high temperature resistance,antioxidant.

11.   The whole light waterproof level can reach IP67 actually,can work directly in water for a short time.

12.   Ultra-human light design, easy to disassemble, install and transport.

Technical Parameters：

working principle：

When there is radiation,photovoltaic modules use solar radiation to generate electricity,Convert light energy to electrical energy,Using intelligent controller to charge battery input power， at the same time overcharge the battery 、over-discharge protection,Intelligent control of lighting and illumination of lighting sources,no manual operation。

easy dis-assembly and assembly：

Second generation integrated solar street light,Light body without glue， the battery with a special waterproof box fixed,the internal structure of the lamp is concise and reliable。Compared with other non-removable replacement products in the market， each component is easy to maintain and replace， cost effective.All wire rods use waterproof male and female mating connectors which are labeled,anti-error function.Designing intentions,embodies the rigorous and humane lighting custom spirit.

Product component exploded view

High efficiency monocrystalline silicon solar panel：

360 degree rotation design:Make up for the inconvenience that traditional integrated solar street lights cannot rotate solar panels at multiple angles,Application to different latitudes and differently oriented roads,adapt to more complex installation environments

Material：High efficiency monocrystalline silicon solar panel，High-efficiency monocrystalline silicon solar panels are widely used in space stations and satellites，Its conversion rate is 20%-30% higher than polysilicon solar panels，max can reach 20%,charging speed is faster.

Lithium battery：

Second generation solar street light lithium battery adopts A1 high-efficiency ternary lithium battery and A1 grade lithium iron phosphate battery，high temperature resistance，high current discharge，lithium battery cycle up to more than 1000 times,LifePO4 battery cycles up to 2000 times。

Double protection

1.      Dual temperature control system，Intelligent controller and lithium battery have temperature control system inside， When the ambient temperature reaches the set limit temperature (60 °C)，Intelligent controller and lithium battery at the same time power off，to protection lithium battery safety。

2.      Each explosion cell of the lithium battery pack is equipped with explosion-proof valve， to prevent the battery from discovering an explosion and placing potential threats out of the way.

Intelligent microwave induction：

The second generation of integrated solar street lights equipped with the latest microwave induction technology。Solved the technical problem that traditional microwave induction is easily disturbed,Sensing distance up to 30 meters， Two to three times that of traditional infrared sensors,Guarantee the effective lighting of street lamps,environmental and energy saving.

RGB flashlight design：

The second generation of integrated solar street lights with RGB flashlight design， 6 colors switch by turns， adjustable blinking speed,off at will,added different colors to the night road.

Multi-color selection and breakthrough process：

Second-generation integrated solar street lamp makes breakthrough progress in surface technology， Both standard and black surfaces are imitation marble painted,silver anodized surface,solved the problem of the single color of traditional integrated solar street lamps,make the overall corrosion resistance of the lamp better，can installation on the seaside and any other bad weather place，waterproof IP grade reach up IP67,enjoying better vision with the elegant appearance.

Remote control instructions：

13. UAV remote control solution,control distance up to 30 meters，bring high corrosion resistance,Four lighting modes can be set,according to the pattern of the season sunshine.

Installation diagram:

1.      Determine the direction of the rotating fastener, tighten the screws；

2.      Secure solar panels and brackets with screws；

3.      Use 2 longer screws to adjust the angle fixed；

4.      Mount the lamp into the pole and tighten the screw.

Precautions :

1.   When  installing  solar  panels  can  adjust  the  optimal  light  acceptance  angle  according  to  the  situation   in  the   area .installing the components, try to handle them gently. Do not collide or knock them to avoid damage.

2.   Choose an unobstructed place to install the solar panel,dust must be cleaned regularly。

3.   All the screws used to install the lamp must be fastened and on the locknut, should be no loosening.。

4.   Because the lighting time and power are set according to the factory specifications, if lighting time needs to be adjusted, must be notified before place and order.

5.   When repairing or replacing light source, lithium battery, controller；model，power，must be the same as the original configuration,we don’t suggest replace the light source with different power models,lithium battery box , controller or casual non-professionals to replace and adjust lighting time parameters.

6.   Replacing internal components, wiring must be strictly in accordance with the corresponding wiring diagram.the positive and negative poles are clearly separated and reversed。

Application:

Widely used in banch roads, streets, and factory roads, parks, villages, mountainous areas and remote areas lighting projects, courtyards, schools, squares and other places that need outdoor lighting, help the domestic traditional lighting